When you use the milling machine at the first time,it was very clean,after you remove the protect bur on the spindle you can calibrate directly,but after you use for a long time,you need to clean inside of the machine thoroughly(calibration plate/clamp/tool rest/spindle chunk) before calibration,you can follow these steps:
（当你第一次使用加工机时,它很干净,在移除保主轴保护棒后可以直接校准,但是你用了很长一段时间后需要彻底清洁机器内部(校准板/夹具/刀架/主轴夹头)在校准之前,你可以遵循以下步骤:）
- Put the calibration plate in the machine,and screw the clamp and confirm the calibration plate is stable.（将标定板放入机器中，拧紧夹盖，确保标定板稳定）
2.Put the calibration bur on No.7(other burs follow this picture).（校准棒放置在7号位置（其他车针放置可以参照图片））
When calibration,please take off the cover 校准的时候需要取下校准环盖
- Click calibration in CNC,the machine will calibrate.（在CNC软件里面点击校准后加工机将开始校准）
( Air pressure needs to between 0.55 to 0.6 when the machine is working)（在校准时气压需要保持在0.55-0.65之间）
評論
0 條評論
請登入寫評論。